The
Pyxis REMPB provides a wireless pushbutton input to the
Pyxis KBDEM module and is designed to work in
conjunction with the Pyxis KBDEM in an industrial type application.
The
Pyxis REMPB is a battery powered device, using two AA non-rechargeable alkaline
batteries.
The Pyxis REMPB has two LED indicators:-
* Green LED indicating transmission.
* Red LED indicating battery low.
Each system can be configured to have unique pairing address (0-F{15}). The
selection of this address is by adjusting a rotary switch located in the battery
compartment. This address must match the address set on the Pyxis KBDEM for the
inputs to be accepted.
There are only a couple of limitations of the Pyxis REMPB that must be taken
into account when implementing a system, these are listed below.
* The Pyxis KBDEM must be local to the PC and connected via USB, while the REMPB
is a wireless device with a range of about 10 – 20 meters.
* The Pyxis REMPB does not provide key repeats as per the HID specification,
scan codes reflect the button press and button release codes.
* Multiple button presses are not available.
In conjunction with the Pyxis KBDEM, the Pyxis REMPB is ideal for integration
into automotive & component test systems.
